Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


toyota yaris 2007 dump needed

toyota yaris 2007 dump needed Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

toyota yaris 2007 dump needed

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Toyota
 
Author Message
mario12377
New member


Joined: 25 Aug 2008
Posts: 7

Posted: Mon Aug 25, 2008 3:11 am    Post subject: toyota yaris 2007 dump needed Reply with quote

I tried to mod mine (i idid not back up...i know stupid....) and now all i get is the white screen a dump will be appeciated.


ac_voltage@yahoo.com
Back to top
mario12377
New member


Joined: 25 Aug 2008
Posts: 7

Posted: Fri Aug 29, 2008 9:23 pm    Post subject: 2007 yaris 9901 miles Reply with quote

No one bothers to reply, i checked the rest of the forum and it seems like its the same on all the branches, people ask for help but no one helps, oh well.....i was able to get the dash to boot by letting the first bite be '80'( its or it seems to be the code needed to let the cpu the eeprom is present) once that was done the dashboard booted ..rpm odometer gas gage works,,,,just to make sure i changed the byte to something different(tried 50 60 ff 00 dd ee 8d) and none allowed the dash to boot, the gages would not work(remember there is no cable coming from the trany but only a square wave signal...a pulse if you prefer) they would just sit as if they have no power, completely different behavior from my honda(just the odometer would stop working but not the other gages) once the dash booted (by using the fist byte as 80 once again) everything worked but the odometer wich continues to be blank....looking at the way the eeprom from a toyota corolla i noticed that info started only at the 0060 byte with a 66 to informed the cpu that data would be ready to exchange and e8f3 to let the cpu know its ok to write and read(interesting this was because if you remove this bytes you can go for a trip in which everything works but when you turn the engine off and then back on the mileage remains as if i never moved the car because nothing was written to the eeprom..i started with 9901 miles when i finished the trip and before i turn my engine off it read 9967 but as soon as i turn the engine off and then back on i was back at 9901)anyway i found a couple of interesting things like one of the lines determines what size your tires are if you change that like you will be going 50 mph abd reading(displaying)70 or viceversa you could be going 50 and displaying 30 (or any number in between depending on the values you use)
Anyways, enjoy the file its set to mph, tires 205/45/17 (which i use)and 9901 miles because i figured if someone need this file he or she must have put about that many miles since its a 2007.
One more thing...i used an eprom programmer from eetools the chipmax2 a family of the topmax which i use at work wich is very expensive about $800 U.S. and not for automobile use but the file is in standard format so you should be able to use it with digi -consultant programmer. i made my own adapter and i added some photos for anybody who may be interested (the adapter cost me 20 cents, and its a 8 pin socket and a foot of ribbon cable from an old hard drive i replaced)
Good luck and have fun exploring.

the server will not allow me to load all of the photos due to size but if anybody even wants them email me for the rar file. so i am loading only the file itself for the eepro
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 269
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Sat Aug 30, 2008 2:32 am    Post subject: : toyota yaris 2007 dump needed Reply with quote

This Car can be program in diga under menu Toyota--> Rav4 C56
if you are using an alternate programmer, you can used the calculator attached
connections are rotated as illustrated in attached picture
_________________
Back to top
mario12377
New member


Joined: 25 Aug 2008
Posts: 7

Posted: Sat Aug 30, 2008 5:27 am    Post subject: pins are not rotated Reply with quote

You are wrong the dash uses a s93c56bd made by seiko and it uses the normal pinout as pin 7 on the chip in NC i reprogramed this chip already more than 20 times and i am 100% sure of what i am saying, this is the California 4 door model, i can not speak for other models but this one manufactured 7-2007 uses a normal pinout.
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 269
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Sat Aug 30, 2008 6:21 am    Post subject: : toyota yaris 2007 dump needed Reply with quote

Its just the same wether it is rotated or normal pin out,
nothing different with the two chips except for the connection of pin
because yaris used this two kind of chips
_________________
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Toyota All times are GMT
Page 1 of 1

Topic Author Forum Replies Posted
No new posts landcrusier 2008 and hilux 2007 adjus... Guest Mileage Correction Toyota 4 Thu Dec 25, 2008 10:58 am
No new posts dump mercedes SLK 2006 EPROM 24C16 electroauto Mileage Correction Audi 0 Tue Dec 23, 2008 10:09 pm
No new posts MCU MC9S12XDP512MAG (2007 E83 ---X... Avechuchoaxel Mileage Correction BMW 3 Sat Dec 13, 2008 2:54 am
No new posts vw Golf 2007 ? programing millage wit... Tommy Mileage Correction Volkswagen / VW 1 Tue Dec 09, 2008 11:31 pm
No new posts POSTS NEEDED FROM DIGAPRO OWNERS milesbetter Odometer Services: Addresses and Contacts 10 Fri Dec 05, 2008 10:08 pm


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support