Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


Pan european

Pan european Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

Pan european

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Honda
 
Author Message
(VAG)Direct
Member


Joined: 25 Feb 2008
Posts: 64
Location: Doncaster,York

Posted: Sun Jul 27, 2008 10:24 am    Post subject: Pan european Reply with quote

Hi has any1 got some information on the pan european i know its a 93c56 eeprom just no instructions on which clip to use...?

Cheers
John.
_________________
JOHNNY-G
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 394

Posted: Mon Jul 28, 2008 6:15 pm    Post subject: : Pan european Reply with quote

use 93 board with soic clip.
Back to top
(VAG)Direct
Member


Joined: 25 Feb 2008
Posts: 64
Location: Doncaster,York

Posted: Mon Jul 28, 2008 6:53 pm    Post subject: : Pan european Reply with quote

I guess its the same epprom as the goldwing 93c56...?

Cheers
John.
_________________
JOHNNY-G
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 394

Posted: Mon Jul 28, 2008 7:14 pm    Post subject: : Pan european Reply with quote

just clip on and try until you get the correct mileage. i will check my notes
for you.
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 394

Posted: Mon Jul 28, 2008 7:17 pm    Post subject: : Pan european Reply with quote

Stirp Down:-

Tilt screen fully up
undo 4x phillips screws holding black covers
undo 4x bolts holding screen on, then lift off screen

undo 4x phillips screws on front of cluster facia
remove mirrors, these just pull off
undo 1x phillips screws (gold) on each side where mirrors were
take out 8x push-in black plastic grommets holding cowling on and lift off
Take note of mileage and unclip 2x plugs on back of cluster under rubber boot
Cluster and front of cowling will now lift out
Remove 2x phillips screws holding cluster to cowling
Remove all phillips screws to separate front and back cluster
Unclip 3x ribbon cables attached to speedo
Lift out Speedo

L56r (93c56) chip
Programmes using Suzuki GSXR1000 in Klm's
There you go. had this pasted in my notes.
Back to top
(VAG)Direct
Member


Joined: 25 Feb 2008
Posts: 64
Location: Doncaster,York

Posted: Mon Jul 28, 2008 8:40 pm    Post subject: : Pan european Reply with quote

Cheers bannybasher i wouldn't think i'll need to use GSXR my box has pan european in the menu...!.!.!
_________________
JOHNNY-G
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 394

Posted: Mon Jul 28, 2008 9:04 pm    Post subject: : Pan european Reply with quote

yer sometimes you have to use other menus, like honda frv does most inc new interga , its just a case of trying until you get the CORRECT mileage. but the above will work 100%
regards
331b
ching ching
www.dashfixer.com
Back to top
(VAG)Direct
Member


Joined: 25 Feb 2008
Posts: 64
Location: Doncaster,York

Posted: Mon Jul 28, 2008 9:22 pm    Post subject: : Pan european Reply with quote

Thanks alot you've been a great influence...!.!.!

Cheers
John.
_________________
JOHNNY-G
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Honda All times are GMT
Page 1 of 1



 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support