Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


How to adjust mileage for Hiace 2006 using DIGA-Consult

How to adjust mileage for Hiace 2006 using DIGA-Consult Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

How to adjust mileage for Hiace 2006 using DIGA-Consult

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Toyota
 
Author Message
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Fri Jun 06, 2008 1:01 am    Post subject: How to adjust mileage for Hiace 2006 using DIGA-Consult Reply with quote

I have DIGA-Consult or Tacho universal 2007 and I want to adjust mileage for Toyota Hiace 2006.

How can I do it, can anybody help me
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 232
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Fri Jun 06, 2008 6:32 am    Post subject: Re: How to adjust mileage for Hiace 2006 using DIGA-Consult Reply with quote

mohsinauto wrote:
I have DIGA-Consult or Tacho universal 2007 and I want to adjust mileage for Toyota Hiace 2006.

How can I do it, can anybody help me


Use SW13 cable or clip
select menu toyota --> Landcruiser --> C66 -- 2002

regards
_________________
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Fri Jun 06, 2008 12:23 pm    Post subject: Toyota Hiace 2006 Reply with quote

Thank you hcip very much,
I can't find SW13 Cable in my Tacho universal 2007 Kit. Can you show me the picture of this cable SW13 and where to connect the it to cluster?

I attached the pictures of Hiace cluster

Thank you again
mohsinauto@hotmail.com
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 232
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Fri Jun 06, 2008 3:03 pm    Post subject: : How to adjust mileage for Hiace 2006 using DIGA-Consult Reply with quote

You can use clip if you have no SW 13 cable
SW13 cable is the wire like in your cable in clip

it has pin configuration 1 8 2 7 3 6 4 5
pin 1 is the wire with stripe



_________________
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 232
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Fri Jun 06, 2008 3:10 pm    Post subject: Re: How to adjust mileage for Hiace 2006 using DIGA-Consult Reply with quote

hcip wrote:


Use SW13 cable or clip
select menu toyota --> Landcruiser --> C66 -- 2002

regards[/quote]

Sorry for my mistake
eeprom is 93C56 and not 93C66

select toyota > Land cruiser > S220

regards
_________________
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Fri Jun 06, 2008 5:26 pm    Post subject: Toyota Hiace 2006 Reply with quote

Thank you very much.
Your explanation is very clear and easy to do but my cluster doesn't look like the photo you sent. It is different, There is no big IC near the EEprom and I can't find these contacts.

Thank you very much
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Fri Jun 06, 2008 11:15 pm    Post subject: Hiace 2006 Reply with quote

Yes , it is the same cluster, After I removed the front white cover, it is the same,

But I get 000000 also after soldring the contacts, and also tryed to put the clip directly on the eeprom 93c56.
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Fri Jun 06, 2008 11:18 pm    Post subject: Hiace 2006 Reply with quote

Hi,

Yes , it is the same cluster, After I removed the front white cover, it is the same,

But I get 000000 also after soldring the contacts, and also tryed to put the clip directly on the eeprom 93c56.

I didn't unerstand the two red circles and the black circle on the cluster plug?
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 232
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Sat Jun 07, 2008 3:03 pm    Post subject: Re: Hiace 2006 Reply with quote

mohsinauto wrote:
Hi,



I didn't unerstand the two red circles and the black circle on the cluster plug?


The two red circle is positive 12V an black circle is negative side if you want to Power up the cluster to check the KM

Use SW13 cable to read the eeprom
This cluster can read by diga without removing the eeprom

make sure that the pin connections are correct
_________________
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Sat Jun 07, 2008 4:49 pm    Post subject: Hiace 2006 Reply with quote

Hi hcip,
Thank you for your patient with me. You are a wonderful person. I hope we can be friends and offer such good and excellent help always.

I think now I know my mistake. When I pulled the wires out of the clip I get number 1, 2, 3, 4 right, but 5, 6, 7, ,8 wrong. I just made them opposite. like this 8 7 6 5

Now I can’t try again because I gave the cluster back to the customer, but now I think I know my mistake.

Is soldering these contacts the only way to do it? Can’t I do it by clip? Because I tried to do it by putting the clip on the 93c56 chip but I get the same result.
Back to top
Clusterslaststand
Senior Member


Joined: 23 May 2008
Posts: 126

Posted: Sat Jun 07, 2008 5:23 pm    Post subject: : How to adjust mileage for Hiace 2006 using DIGA-Consult Reply with quote

It should work with the clip.
Maybe the soldering on the wires of the clip was bad or the legs of the eeprom where not clean.
Use fibreglass pen and pcb cleaner to clean legs next time.
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Sat Jun 07, 2008 10:19 pm    Post subject: Hiace Reply with quote

Thank you very much
and I don't have to change the sequence of the wires in the clip? Because I know that Toyota Yaris 2003 I should change the sequence of the wires in the clip.
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 232
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Sun Jun 08, 2008 1:16 am    Post subject: Re: Hiace 2006 Reply with quote

mohsinauto wrote:

Is soldering these contacts the only way to do it? Can’t I do it by clip? Because I tried to do it by putting the clip on the 93c56 chip but I get the same result.


You can clip the eeprom but you have to remove the wax on it
it is better to solder it on solder pad
if you are in good soldering job, next time that some guys opened its
cluster they will thinking that it still a virgin becaused you have not touched the wax on eeprom

Regards
_________________
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 282

Posted: Sun Jun 08, 2008 7:47 pm    Post subject: : How to adjust mileage for Hiace 2006 using DIGA-Consult Reply with quote

if you need to remove the laquar use nitromoors . it works a treat. a little bit on a ear bud, leave it to soak for a few minutes.
Rub off with a fibre glass pen . easy.

A point about the yaris with rotated pins:
if your 95 board have a port 4, then use that port
it saves time moving all the pins two to the left.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Toyota All times are GMT
Page 1 of 1

Topic Author Forum Replies Posted
No new posts Fox june 2008 possible with Diga Cons... Peter Mileage Correction Volkswagen / VW 3 Sat Nov 29, 2008 5:25 pm
No new posts how to adjust golf 4 josh Mileage Correction Volkswagen / VW 7 Sat Nov 29, 2008 2:47 pm
No new posts DP3 vs Enigma vs Diga Consult john54321 General questions 7 Thu Nov 27, 2008 5:39 pm
No new posts Tacho mileage calculator!!!! factoring General questions 2 Wed Nov 26, 2008 2:59 pm
No new posts diga master II ? kenwood General questions 5 Wed Nov 26, 2008 8:36 am


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support