Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


Please Advise!!! Problem getting 2001 S60 Cluster to work!!

Please Advise!!! Problem getting 2001 S60 Cluster to work!! Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

Please Advise!!! Problem getting 2001 S60 Cluster to work!!

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Volvo
 
Author Message
Dave-Singapore
Guest





Posted: Mon Nov 29, 2004 4:43 pm    Post subject: Please Advise!!! Problem getting 2001 S60 Cluster to work!! Reply with quote

Hi all experts

Please advise what can I do after I program the S60 cluster and I am not getting any LCD display and needles not moving.

I have check and check and check many times but to no avail!!!! Initally I program the cluster without changing the crystal as I was able to read the original mileage (deviate a bit). I subsequently changed the crystal to a 4 mhz and reprogram the cluster according to the manual.

However I am still unable to get any reading when I plug it back into the car. I have even remove the legs and resolder them again (even the two on each side of those I was suppose to lift).

Please help as I am stuck with this currently......sigh. Confused ....I know I have alot more to learn and the only ones who could guide me are you guys.

Appreciate all your kind assistance.

Thank you.

Dave.
Back to top
Admin
Site Admin


Joined: 15 Aug 2004
Posts: 60

Posted: Mon Nov 29, 2004 10:22 pm    Post subject: : Please Advise!!! Problem getting 2001 S60 Cluster to work!! Reply with quote

Hi Dave,
maybe you have damaged the processor with your
programming with the false crystal.
If you have checked all other connections....
Regards,
Guido
Back to top
dave
Junior member


Joined: 19 Nov 2004
Posts: 11

Posted: Tue Nov 30, 2004 2:28 am    Post subject: : Please Advise!!! Problem getting 2001 S60 Cluster to work!! Reply with quote

Dear Guido,

You mentioned that I may have damaged the processor, is there any way I may be able to repair the cluster????

Do you have a avialable unit for replacement??

Thank you.

Dave
Back to top
Admin
Site Admin


Joined: 15 Aug 2004
Posts: 60

Posted: Tue Nov 30, 2004 7:53 am    Post subject: : Please Advise!!! Problem getting 2001 S60 Cluster to work!! Reply with quote

Dear Dave,
yes, i think that the processor is damaged, if you have
checked all other things and they are ok.....

Getting a Volvo cluster isn´t easy in germany, maybe you
can get a swedish contact who can help you with this.

Regards,
Guido
Back to top
dave
Junior member


Joined: 19 Nov 2004
Posts: 11

Posted: Tue Nov 30, 2004 10:16 am    Post subject: : Please Advise!!! Problem getting 2001 S60 Cluster to work!! Reply with quote

Dear Guido,

I manage to get another cluster but the puzzling thing is that when I plug the cluster in, I was seeing the same result as the original cluster.

This cluster I manage to get is a working unit. Could there be any fuse or connection I may need to check???

Thanks again.

Dave.
Back to top
DashfixDotNet
Moderator


Joined: 20 Nov 2004
Posts: 302
Location: USA

Posted: Wed Dec 01, 2004 6:39 am    Post subject: : Please Advise!!! Problem getting 2001 S60 Cluster to work!! Reply with quote

Dear Dave,
I think you didn't pay attention to what I said earlier about replacing a Volvo cluster. Your first one dosen't work because somehow you managed to damage it. The second shows the same result because it is simply not coded to the car. Therefore the display, the gauges will not work. Had it been a cluster equipped with a 908 I could've helped you because the Flash memory that stores the coding is a seperate IC on the board. But since your board is equipped with a 912 processor the coding might in the Flash that's in that very same processor (912) but I'm not 100% sure.
The other solution is to have a new cluster coded to the car and for that you need the dealer tool called VADIS.

Serge
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Volvo All times are GMT
Page 1 of 1

Topic Author Forum Replies Posted
No new posts Seat Cordoba 2002 via obd or chip in ... Tommy Mileage Correction Seat 1 Thu Dec 04, 2008 1:29 pm
No new posts SAXO problem??? pichas1 Mileage Correction Citroen 0 Mon Dec 01, 2008 11:04 pm
No new posts Mk 4 Golf Immobilser problem Guest Mileage Correction Volkswagen / VW 4 Wed Nov 26, 2008 12:34 pm
No new posts MERCEDES BENZ S430 (W220) 2002 08/02 ... Avechuchoaxel Mileage Correction Mercedes-Benz 3 Wed Nov 26, 2008 8:26 am
No new posts Fiat Punto 2001 almeida Mileage Correction Fiat 1 Sun Nov 23, 2008 5:01 pm


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support