Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


Camry 93C46 question

Camry 93C46 question Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

Camry 93C46 question

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Toyota
 
Author Message
Guest






Posted: Tue Apr 19, 2005 6:40 pm    Post subject: Camry 93C46 question Reply with quote

Okay, I took the cluster apart and found the 93C46 eeprom chip but was not able to use the 8-pin clip to clip the chip from the top because the speedo is blocking it and I'm afraid that I might break the speedo needle if I take this thing apart.

What's the correct way of doing this car? because the manual does not state anything about it. Thanks.
Back to top
DashfixDotNet
Moderator


Joined: 20 Nov 2004
Posts: 296
Location: USA

Posted: Sat Apr 23, 2005 6:14 am    Post subject: : Camry 93C46 question Reply with quote

Hello,
Use a desoldering gun to get rid of solder that's on each pin of the eeprom. Remove it then from the board and program it. It's the safest and best way to work on it.

Serge
Back to top
fbones
Junior member


Joined: 03 Nov 2004
Posts: 19

Posted: Sun May 22, 2005 9:24 am    Post subject: : Camry 93C46 question Reply with quote

Can you suggest a desoldering gun tool? Thanks.
Back to top
DashfixDotNet
Moderator


Joined: 20 Nov 2004
Posts: 296
Location: USA

Posted: Mon May 23, 2005 7:15 am    Post subject: : Camry 93C46 question Reply with quote

Hakko 808
Back to top
terrym4616
New member


Joined: 24 Jan 2007
Posts: 1

Posted: Wed Jan 24, 2007 5:01 am    Post subject: : Camry 93C46 question Reply with quote

i usualy just solder wires under the 8 pin chip its much easer than trying to desolder the chip off
Back to top
mj75s
New member


Joined: 27 Jun 2007
Posts: 5

Posted: Tue Jul 10, 2007 10:48 pm    Post subject: trouble with camry Reply with quote

Hey what port do I attach to program the camry's 93c46? I have it on port 0 and the eprom clip attached correctly. Can someone e-mail the help guide to me on the camry..also has anyone had any luck programming the usa crysler minivans?? Please e-mail me your thoughts Mseiler27@excite.com....
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Toyota All times are GMT
Page 1 of 1

Topic Author Forum Replies Posted
No new posts Diga Consult question Peda General questions 3 Fri Oct 10, 2008 10:06 pm
No new posts 93c46 help required hcip Mileage Correction Toyota 1 Tue Sep 16, 2008 8:29 am
No new posts Have a question about airbag dumps SpeedoTech Open Discussion 1 Sun Aug 24, 2008 3:24 am
No new posts corolla 93c46 Noob Mileage Correction Toyota 1 Sat Jun 07, 2008 4:37 am
No new posts passat question? fes_786 Mileage Correction Volkswagen / VW 5 Mon Jun 02, 2008 12:02 am


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support