Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


Problem With Mileage Correction on an 08 Fabia

Problem With Mileage Correction on an 08 Fabia Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

Problem With Mileage Correction on an 08 Fabia

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> General questions
 
Author Message
akshat21
New member


Joined: 28 May 2008
Posts: 5

Posted: Wed May 28, 2008 4:54 pm    Post subject: Problem With Mileage Correction on an 08 Fabia Reply with quote

Hi There,

I have recently bought a diga consult and am a complete noob at mileage correction. I am based in India.

My Problem is as follows:
I wanted to correct a mileage on a Skoda Fabia 1.4 TDi PD with 93c86 chip. I opened the meter and located the chip and put the clip on the chip. (As directed by the diga consult). However, the Diga is not able to see the correct mileage. If I use the adjust KM menu and enter the new mileage value, the diga would just say "Working" and then I would get the error "Data Not Equal, Adjust clip and press any key".. I have tried to adjust the clip many times but am still getting the same message.

I have the latest version on the Diga but have had no luck with the mileage correction.

Can somebody Please help??
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 262

Posted: Wed May 28, 2008 5:14 pm    Post subject: : Problem With Mileage Correction on an 08 Fabia Reply with quote

1st you can not do a skoda 2008 with didi box , also if its a clone box you may not be able to read eeprom correctly. mine never did without adjustment.
do you get a full dataset when you read chip?
good luck
Back to top
akshat21
New member


Joined: 28 May 2008
Posts: 5

Posted: Wed May 28, 2008 5:39 pm    Post subject: : Problem With Mileage Correction on an 08 Fabia Reply with quote

Bannybasher wrote:
1st you can not do a skoda 2008 with didi box , also if its a clone box you may not be able to read eeprom correctly. mine never did without adjustment.
do you get a full dataset when you read chip?
good luck


I know its not a clone as it was bought from Diga. Anyways, I don't know what you mean by a full data set, if you mean the old KM value, then no, I only get 48560 as the old value when the fabia has done 5500 Kms. When I use the read function, I do get the data from the EEPROM. I am connecting Diga directly to the 93C86 Chip on the meter..
Back to top
apples24
Member


Joined: 03 Nov 2005
Posts: 47

Posted: Thu May 29, 2008 7:53 am    Post subject: : Problem With Mileage Correction on an 08 Fabia Reply with quote

is there any crystals to join? are you putting the red wire on pin1? are you plugging into the correct port? try using another port ont he board and read again
Back to top
jimdashkirk
Member


Joined: 18 Jun 2008
Posts: 46
Location: bonnie scotland

Posted: Fri Jul 04, 2008 11:25 pm    Post subject: : Problem With Mileage Correction on an 08 Fabia Reply with quote

you can not do a 08 skoda with diga box, simple as that.
you can do ANY vag after june 2006. it wont go ,thats why i had to buy a dp3. does the blinking lot. cheaper than aresold F))ker. and in colour.


You may need to hunt.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> General questions All times are GMT
Page 1 of 1

Topic Author Forum Replies Posted
No new posts problem with mithsubishi montero 2003 samirpm Mileage Correction Mitsubishi 1 Sat Nov 22, 2008 3:43 pm
No new posts 1991 E31 V12 M/T BMW 850 Where is th... Avechuchoaxel Mileage Correction BMW 9 Thu Nov 20, 2008 11:55 pm
No new posts You got Problem with cable 908, dongl... didi_du_93000 General questions 2 Sun Nov 16, 2008 5:07 pm
No new posts Problem with cable 908, dongle 912, A... didi_du_93000 Mileage Correction Ford 3 Sun Nov 16, 2008 4:23 pm
No new posts Digital Mileage Correction Services W... REMAP.ME.UK Odometer Services: Addresses and Contacts 0 Sat Nov 15, 2008 8:34 pm


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support