Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


E36 sw24

E36 sw24 Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

E36 sw24

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction BMW
 
Author Message
josh
Junior member


Joined: 25 Jun 2008
Posts: 25
Location: walsall

Posted: Tue Jul 01, 2008 1:16 am    Post subject: E36 sw24 Reply with quote

hi when i try to do the mileage through the diagnostic , it says "working" but nothing happens. what is the correct procedure to do it. it is a software 24. your help is much appreciated, thanks Crying or Very sad
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 232
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Tue Jul 01, 2008 1:41 am    Post subject: Re: E36 sw24 Reply with quote

josh wrote:
hi when i try to do the mileage through the diagnostic , it says "working" but nothing happens. what is the correct procedure to do it. it is a software 24. your help is much appreciated, thanks Crying or Very sad


If your tool is clone, Ask the chinese seller
If it is original, ask here
http://www.dashforum.com/ or PM Dashfixer or Dashfixer_drew

Have a nigthmare on clone machine Rolling Eyes
_________________
Back to top
zak
Member


Joined: 16 Apr 2008
Posts: 67

Posted: Tue Jul 01, 2008 7:31 am    Post subject: : E36 sw24 Reply with quote

look in your manual -

Remove the cluster.
• Open it (pull the two parts of it away from each other).
• On front of the board you can see the 8pin chip 93C46 or B58323. Remove the
paint on it to get access to pin 1+2
• Put the board back in the car and connect it with the plugs.
• Connect pin 1+2 on the chip.
• Turn ignition on and disconnect pin 1+2 after 1 second.
• The display now shows , EEP 1 or Code N1.
• Connect the Tacho Universal to the BMW diagnostic plug and the diagnostic port.
• Select the menu BMW-3er E36-Diagnosis.
• The Tacho Universal shows you the old value.
• Enter the new value.
• Verify the new value with OK.
• Turn ignition off.
• Disconnect the board from the car.
• If you connect it again, the new value will be displayed.
Back to top
josh
Junior member


Joined: 25 Jun 2008
Posts: 25
Location: walsall

Posted: Tue Jul 01, 2008 12:03 pm    Post subject: : E36 sw24 Reply with quote

thanks Zak.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction BMW All times are GMT
Page 1 of 1



 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support