Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


Bmw Scanner Interface PA-SOFT v1.2.5 doesn't work on E38

Bmw Scanner Interface PA-SOFT v1.2.5 doesn't work on E38 Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

Bmw Scanner Interface PA-SOFT v1.2.5 doesn't work on E38

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction BMW
 
Author Message
jake
Guest





Posted: Mon Nov 14, 2005 4:36 am    Post subject: Bmw Scanner Interface PA-SOFT v1.2.5 doesn't work on E38 Reply with quote

I used Bmw Scanner Interface PA-SOFT 1.2.5 on the E38 manufacturing date 11/97
Details: IKE
BMWTNR: 8.376.705 hw:04 sw:05
The interface doesn't work with OBD2 connection. The error i get is
"No Communication with Unit"
"Try again"
I first turned the keys to second position then connected the interface, after that connected the serial cable.

But when i connect using BMW connection cable, it reads number of errors but doesn't show any error number or part number which is defective.
The MileageCorrect option is also not enabled. when i try to Read EEPROM i get error message "Read EEPROM with errors". I think it is not reading the 0x100 till 0xIFO messages.



When i use Service Reset option, it says Done but atually doesn't reset it when i look at the display inside the car.

The LCM details are:
8.372.875 hw:10 sw:32

I will appreciate if someone can please let me what is wrong or if anybody faced similar problem
Back to top
djalix
New member


Joined: 16 Nov 2005
Posts: 2

Posted: Wed Nov 16, 2005 6:37 pm    Post subject: Re: Bmw Scanner Interface PA-SOFT v1.2.5 doesn't work on E38 Reply with quote

I have the same software as you and my car is E46 2003 (manufacturing date 10/2002) i am getting the same error message too.

jake wrote:
I used Bmw Scanner Interface PA-SOFT 1.2.5 on the E38 manufacturing date 11/97
Details: IKE
BMWTNR: 8.376.705 hw:04 sw:05
The interface doesn't work with OBD2 connection. The error i get is
"No Communication with Unit"
"Try again"
I first turned the keys to second position then connected the interface, after that connected the serial cable.

But when i connect using BMW connection cable, it reads number of errors but doesn't show any error number or part number which is defective.
The MileageCorrect option is also not enabled. when i try to Read EEPROM i get error message "Read EEPROM with errors". I think it is not reading the 0x100 till 0xIFO messages.



When i use Service Reset option, it says Done but atually doesn't reset it when i look at the display inside the car.

The LCM details are:
8.372.875 hw:10 sw:32

I will appreciate if someone can please let me what is wrong or if anybody faced similar problem
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction BMW All times are GMT
Page 1 of 1

Topic Author Forum Replies Posted
No new posts 95xxx does not work! Peter General questions 5 Sat Nov 08, 2008 8:33 am
No new posts after correction on colt 2000 cluster... almeida Mileage Correction Mitsubishi 0 Tue Aug 19, 2008 6:13 pm
No new posts will this work for a kawasaki 2006 vu... guest2008 Mileage Correction Kawasaki 0 Mon Jul 14, 2008 4:34 am
No new posts tacho vs digi soft kll General questions 3 Mon Jun 02, 2008 1:04 am
No new posts Snap-on Diagnostic scanner plugs p14y4c4rd5ri6h7 General questions 0 Wed Apr 16, 2008 3:54 am


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support