Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


BMW light reset service for BMW E46 and BMW E52

BMW light reset service for BMW E46 and BMW E52 Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

BMW light reset service for BMW E46 and BMW E52

 
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction BMW
 
Author Message
Andy
Moderator


Joined: 19 Aug 2004
Posts: 113

Posted: Thu Sep 02, 2004 11:50 am    Post subject: BMW light reset service for BMW E46 and BMW E52 Reply with quote

Reset procedure for BMW clusters with SIA IV using the reset mode (possible from 9/99 for E46 and E52).

Ignition key must be off.
Press and hold the trip odometer button in the instrument cluster (left button) and turn the ignition key to the first position.
Keep the button pressed for approx. 5 seconds until one of the following words appear in the display: "Oil Change" or "Inspection" with "Reset".
Release the reset button and press and hold again the "Reset " begins to flash.
While the display is flashing, press the left button briefly to reset the service interval. After the display has shown the new interval, the following will appear: "End SIA".
The system can only be reset again after 2.5 gal (10 liters) of fuel have been consumed.
Back to top
scarface_34
New member


Joined: 23 Oct 2005
Posts: 1

Posted: Sun Oct 23, 2005 10:39 am    Post subject: : BMW light reset service for BMW E46 and BMW E52 Reply with quote

hello

i have an E46 03 and have tried to reset the oil inspection light , however when i follow the procedure , the only things that seems to reset is the brake fluid etc light e.g after following the procedure everything seems fine , after pressing the left hand button and the reset oil service light stops flashing it says END , but then it says 10/07 which refers to the brake fulid change

any assistance on this would be appreciated
Back to top
DashfixDotNet
Moderator


Joined: 20 Nov 2004
Posts: 297
Location: USA

Posted: Mon Oct 31, 2005 8:30 am    Post subject: : BMW light reset service for BMW E46 and BMW E52 Reply with quote

As mentioned in the procedure (by Andy) you have to press briefly until it says "End SIA" not "End" only. When the RESET word starts blinking and you press rapidly the button, the first thing that appears within a second is "End" (and it's for oil service only) but if you keep on pressing briefly or rapidly the button for 10 more seconds it will show "End SIA". If you don't get this after strictly following the procedure then I assume your cluster has a internal software problem.

Serge
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction BMW All times are GMT
Page 1 of 1

Topic Author Forum Replies Posted
No new posts Your Prices for Milage Correction Ser... fxs Mileage Correction other cars 3 Tue Oct 28, 2008 8:48 am
No new posts bmw 323i 1998, 318i 1999 odometer reset ally_jeff Mileage Correction BMW 0 Sun Oct 19, 2008 12:25 pm
No new posts Honda Civic 1998 odometer reset? RL Mileage Correction Honda 2 Sun Oct 19, 2008 12:17 pm
No new posts POOR ETL SERVICE! hexxman Open Discussion 0 Sun Sep 07, 2008 11:17 pm
No new posts Mielaeg Reset iain2611 Mileage Correction Peugeot 0 Tue Jul 01, 2008 11:50 pm


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support