| |
| Author |
Message |
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Tue Jul 15, 2008 12:25 am Post subject: Touareg instruction needed ??? |
 |
|
| I have just received my Tacho Universal. Made in China. Came with the BMW key reader then looks like is the 07 model as advertised. I have checked the Manual CD disc and no instruction for Touareg at all !!!. Is that possible this device is not the 2007 update. How to check it? Can somebody provide the detailed procedure for 04 VW Touareg please. |
|
| Back to top |
|
 |
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Tue Jul 15, 2008 1:09 am Post subject: : Touareg instruction needed ??? |
|
|
| I just powered up the device and shows diga consult update 2007 ver Jan 24. 2008. I can pull from the menu the Touareg. I`m missing detailed manual how to do it. Can somebody send me the pdf. file for VW please. |
|
| Back to top |
|
|
zak
Member
Joined: 16 Apr 2008
Posts: 67
|
| Posted: Tue Jul 15, 2008 6:33 am Post subject: : Touareg instruction needed ??? |
|
|
Close the doors.
Use the VW Sharan 2000 OBD Plug.
Chose in your Diga menü: Volkswagen - Autodetect
(Dont use "Autodetect CAN")
After login your Diga shows the old value.
Enter the new value - OK.
Keep the doors closed !
Chose in your Diaga menü: Volkswagen - Touareg - Service
Enter in Chanel 2: 0000
Enter in Chanel 40: (the value since the last Service/100)
Chose in your Diga menü: Volkswagen - 1551
Erase all errors. |
|
| Back to top |
|
|
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Tue Jul 15, 2008 11:52 am Post subject: : Touareg instruction needed ??? |
|
|
I have heard from so many people Touareg is done by the eprom???
Even if you go to the menu on the Diga the device is asking you to connect the eprom clip. |
|
| Back to top |
|
|
zak
Member
Joined: 16 Apr 2008
Posts: 67
|
| Posted: Tue Jul 15, 2008 2:43 pm Post subject: : Touareg instruction needed ??? |
|
|
yes, if you have time to waste, you can do it also via clip.
remove the cluster and open it.
look for the eeprom 24C08
look for the silver chrystal and join its contacts
(very important in this case!!!)
connect clip to port 3
put the clip on 24C08 (red on pin 1)
select in your Diga menu: Volkswagen - Touareg - V1
your Diga shows you the old value - if its wrong try it with - ...-V 2
Select the menu Adjust KM.
Enter the new value.
Verify the new value with OK. |
|
| Back to top |
|
|
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Tue Jul 15, 2008 5:22 pm Post subject: : Touareg instruction needed ??? |
|
|
Have you ever done it with the Diag connection ?
I have tried the 2000 sharan connection as advised by you. No succed.
Waited maybe 2 min and then showed up bunch of useless letters. |
|
| Back to top |
|
|
zak
Member
Joined: 16 Apr 2008
Posts: 67
|
| Posted: Tue Jul 15, 2008 8:26 pm Post subject: : Touareg instruction needed ??? |
|
|
Ever.
Turn ignition on
do it as described.
Turn ignition off.
If it is not changed -
remove the fuse of the cluster or remove the battery cable
for a few seconds. |
|
| Back to top |
|
|
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Wed Jul 16, 2008 12:11 am Post subject: : Touareg instruction needed ??? |
|
|
I did it thru the VW touareg Manu !!!
VW- Touareg- Diagn. Then showewd me the old value
Changed to new value - OK
Done
Now I have problem with reset the Service. No adaptation wanna change.
chanel 02 shows -187
chanel 40 up to 46 shows the same value -187
What to do ?
already disconnected the battery for 30 min. Didn`t help. |
|
| Back to top |
|
|
zak
Member
Joined: 16 Apr 2008
Posts: 67
|
| Posted: Wed Jul 16, 2008 6:16 am Post subject: : Touareg instruction needed ??? |
|
|
Keep the doors closed !
Chose in your Diaga menü: Volkswagen - Touareg - Service
Enter in Chanel 2: 0000
Enter in Chanel 40: (the value since the last Service/100)
Chose in your Diga menü: Volkswagen - 1551
Erase all errors. |
|
| Back to top |
|
|
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Wed Jul 16, 2008 12:43 pm Post subject: : Touareg instruction needed ??? |
|
|
I have tried so many times. as described. In channel 2 I`m able to put only one 0. Can`t put more 0 unless at the beginning is other digit like 1,2,3,4,5 etc.
I tried put 1 alone 0 alone and any other 4 digit combination in all channels. then press OK- says Working then comes back to the menu with channel. Then I check once again and with the channel is the old value
-18760
If I go to the dealer like that they will find out the mileage was rolled? |
|
| Back to top |
|
|
zak
Member
Joined: 16 Apr 2008
Posts: 67
|
| Posted: Wed Jul 16, 2008 2:15 pm Post subject: : Touareg instruction needed ??? |
|
|
ok,
let channel 2 as it is,
try to change only channel 40 ! |
|
| Back to top |
|
|
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Wed Jul 16, 2008 5:58 pm Post subject: : Touareg instruction needed ??? |
|
|
| No channel wanna change at all. |
|
| Back to top |
|
|
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Thu Jul 17, 2008 2:12 am Post subject: : Touareg instruction needed ??? |
|
|
I`m from USA. Instrument Cluster is coded to do no Interval service. In order to get access to those channels I had to recode the cluster to the European specifications I have changed third digit from the end from 3 to 1 .
3- means no service interval
1- Service interval on.
after I changed this I do have access to all channels related to the Service
02
040 up to 046
I have another question regarding channel 40
adapted value is 30 which is OK
actual value is 145560
I`m little worry about this actual value
looks like is 145560 km
any suggestions ? |
|
| Back to top |
|
|
zak
Member
Joined: 16 Apr 2008
Posts: 67
|
| Posted: Thu Jul 17, 2008 6:25 am Post subject: : Touareg instruction needed ??? |
|
|
you have changed the value
you have adjust the service.
you shuld have to erase all errors
well done ! no problems.
i dont understand:
"I`m little worry about this actual value
looks like is 145560 km " |
|
| Back to top |
|
|
astrofil
Junior member
Joined: 09 Jul 2008
Posts: 13
|
| Posted: Thu Jul 17, 2008 12:28 pm Post subject: : Touareg instruction needed ??? |
|
|
In channel 40 you have few lines of data.
the first one is the old value
second line is the actual data which is 145560
and in third line is the adapted data .
I don`t known what`s the actual data line ??? |
|
| Back to top |
|
|
|
|
