| All Topics |
| Author |
Message |
josh Junior member
Joined: 25 Jun 2008 Posts: 10 Location: walsall
|
Posted: Tue Jul 01, 2008 2:16 am Post subject: E36 sw24 |
|
|
hi when i try to do the mileage through the diagnostic , it says "working" but nothing happens. what is the correct procedure to do it. it is a software 24. your help is much appreciated, thanks  |
|
| Back to top |
|
 |
|
hcip Senior Member
Joined: 03 Mar 2006 Posts: 146 Location: Brgy. Commonwealth, Quezon City Philippines
|
Posted: Tue Jul 01, 2008 2:41 am Post subject: Re: E36 sw24 |
|
|
| josh wrote: | hi when i try to do the mileage through the diagnostic , it says "working" but nothing happens. what is the correct procedure to do it. it is a software 24. your help is much appreciated, thanks  |
If your tool is clone, Ask the chinese seller
If it is original, ask here
http://www.dashforum.com/ or PM Dashfixer or Dashfixer_drew
Have a nigthmare on clone machine  _________________
 |
|
| Back to top |
|
 |
zak Member
Joined: 16 Apr 2008 Posts: 38
|
Posted: Tue Jul 01, 2008 8:31 am Post subject: : E36 sw24 |
|
|
look in your manual -
Remove the cluster.
• Open it (pull the two parts of it away from each other).
• On front of the board you can see the 8pin chip 93C46 or B58323. Remove the
paint on it to get access to pin 1+2
• Put the board back in the car and connect it with the plugs.
• Connect pin 1+2 on the chip.
• Turn ignition on and disconnect pin 1+2 after 1 second.
• The display now shows , EEP 1 or Code N1.
• Connect the Tacho Universal to the BMW diagnostic plug and the diagnostic port.
• Select the menu BMW-3er E36-Diagnosis.
• The Tacho Universal shows you the old value.
• Enter the new value.
• Verify the new value with OK.
• Turn ignition off.
• Disconnect the board from the car.
• If you connect it again, the new value will be displayed. |
|
| Back to top |
|
 |
josh Junior member
Joined: 25 Jun 2008 Posts: 10 Location: walsall
|
Posted: Tue Jul 01, 2008 1:03 pm Post subject: : E36 sw24 |
|
|
| thanks Zak. |
|
| Back to top |
|
 |
|