Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


Vectra (04) problem

Vectra (04) problem Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

Vectra (04) problem

Goto page 1, 2, 3  Next  
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Opel
 
Author Message
teerak2uk
Member


Joined: 12 Jun 2008
Posts: 30
Location: UK,Lincolnshire

Posted: Thu Jun 12, 2008 10:21 pm    Post subject: Vectra (04) problem Reply with quote

Hi i`ve got an 04 Vectra with VDO stamped cluster but unable to determine which chip to read from any help on this guys is appreciated
Back to top
teerak2uk
Member


Joined: 12 Jun 2008
Posts: 30
Location: UK,Lincolnshire

Posted: Thu Jun 12, 2008 10:23 pm    Post subject: Other pics Reply with quote

here are some other pics of the cluster
Back to top
fes_786
Member


Joined: 01 May 2008
Posts: 48
Location: uk

Posted: Thu Jun 12, 2008 10:55 pm    Post subject: : Vectra (04) problem Reply with quote

the chip u are looking for is a 93c66 eeprom

were u see the lcd that displays mileage

its under the plastic so u will have to take needles off
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 389

Posted: Thu Jun 12, 2008 11:39 pm    Post subject: : Vectra (04) problem Reply with quote

Twist off needles . dont for get osc on other side of pcb. take off the white lcd carrier and lay lcd screen flat.
Back to top
teerak2uk
Member


Joined: 12 Jun 2008
Posts: 30
Location: UK,Lincolnshire

Posted: Fri Jun 13, 2008 12:13 am    Post subject: : Vectra (04) problem Reply with quote

will it be behind the lcd carrier as i did remove the needles but found nothing that side Confused
Back to top
teerak2uk
Member


Joined: 12 Jun 2008
Posts: 30
Location: UK,Lincolnshire

Posted: Fri Jun 13, 2008 12:43 am    Post subject: : Vectra (04) problem Reply with quote

Thanks guys seen it now just below the carrier but has to be reomoved to enable the clip to go onto the eeprom

and thanks again Smile
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 389

Posted: Fri Jun 13, 2008 8:26 am    Post subject: : Vectra (04) problem Reply with quote

teerak2uk wrote:
Thanks guys seen it now just below the carrier but has to be reomoved to enable the clip to go onto the eeprom

and thanks again Smile


its easy to remove carrier. lift over lcd and unclip the 4 clips. with care its easy . clip osc. no need to remove eeprom.#
Back to top
(VAG)Direct
Member


Joined: 25 Feb 2008
Posts: 64
Location: Doncaster,York

Posted: Mon Aug 04, 2008 9:43 pm    Post subject: : Vectra (04) problem Reply with quote

has any1 got a pic of the osc on the newer clocks to these with the single LCD screen or a general description of where it is and what it looks like...?

Cheers in advance.
John.
_________________
JOHNNY-G
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 389

Posted: Tue Aug 05, 2008 12:13 am    Post subject: : Vectra (04) problem Reply with quote

its silver oblong shape. got 3 points each side.


I Cant remember where it is cos im too bloody old and also on the dp3
you dont need to piss about clipping osc.
Back to top
fes_786
Member


Joined: 01 May 2008
Posts: 48
Location: uk

Posted: Tue Aug 05, 2008 4:00 am    Post subject: : Vectra (04) problem Reply with quote

(VAG)Direct wrote:
has any1 got a pic of the osc on the newer clocks to these with the single LCD screen or a general description of where it is and what it looks like...?

Cheers in advance.
John.


hi the chip looks like the attachment at top which says chip

its the silver thing with 2 small pins and 1 fat 1

u need to bridge the 2 small 1's

its on the opposite side of board i.e backside

front is were lcd and eeprom is

hope it helps
Back to top
fes_786
Member


Joined: 01 May 2008
Posts: 48
Location: uk

Posted: Tue Aug 05, 2008 4:02 am    Post subject: : Vectra (04) problem Reply with quote

cant edit post?

well its the pic wich says:

chip 2 with crystal.JPG
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 264
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Tue Aug 05, 2008 8:22 am    Post subject: : Vectra (04) problem Reply with quote

Very Happy Very Happy Very Happy
_________________
Back to top
(VAG)Direct
Member


Joined: 25 Feb 2008
Posts: 64
Location: Doncaster,York

Posted: Tue Aug 05, 2008 9:16 am    Post subject: : Vectra (04) problem Reply with quote

Thanks hcip but this is on an 04plate the one i'm doing is different its a 56plate bannybasher know's what i mean but he can't remember where it is i wish i had taken pics of the clocks now like these in this topic...!.!.!

Cheers..!.!.!
_________________
JOHNNY-G
Back to top
hcip
Senior Member


Joined: 03 Mar 2006
Posts: 264
Location: Brgy. Commonwealth, Quezon City Philippines

Posted: Tue Aug 05, 2008 9:32 am    Post subject: : Vectra (04) problem Reply with quote

take a picture in the whole PCB and we will point where it is
_________________
Back to top
(VAG)Direct
Member


Joined: 25 Feb 2008
Posts: 64
Location: Doncaster,York

Posted: Tue Aug 05, 2008 9:38 am    Post subject: : Vectra (04) problem Reply with quote

I'm guessing it should be in the same place as the one on this page just as bannybasher described it as a chip not a silver chrystal.....?
Cheers..!
_________________
JOHNNY-G
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Opel All times are GMT
Goto page 1, 2, 3  Next
Page 1 of 3

Topic Author Forum Replies Posted
No new posts MB sprinter VDO 1999 programing probl... Tommy Mileage Correction Mercedes-Benz 4 Sat Dec 20, 2008 9:40 pm
No new posts problem with 2001 golf solar999 Mileage Correction Volkswagen / VW 7 Tue Dec 16, 2008 9:48 pm
No new posts have problem with diga!!! LUCKY CROATIA General questions 5 Tue Dec 09, 2008 9:29 pm
No new posts Problem for Audi A3 magneti marelli S... didi_du_93000 General questions 3 Sun Dec 07, 2008 10:44 pm
No new posts Problem with mazda 3 itay Mileage Correction Mazda 4 Fri Dec 05, 2008 9:07 am


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support