Odometer-Correction.com

[mohsinauto]

How can I adjust the milage for Golf 5 2005? I have DIGA-Consult. but there is no golf 5 in the manual. In the DIGA-Consult there is golf 5 by Diagnose and clip.

I tryed to do it by OBDII but I could't. although I was able to adjust milage for Bora and Passat 2003 by ODBII.

I even removed the cluster but I couldn't take of the back cover of it, I was afraid to brake it!!!!

Please help
mohsinauto@hotmail.com

[zak]

Use the CAN-Dongle and the CAN-OBDII plug.

Select in your Diga: Volklswagen - Autodetect CAN

enter new mileage

after finish, use CAN 1551 to clear the ECU memory
Menue: Volkswagen - CAN 1551
(dont switch ignition on or off while can-dongle is connectet)

correct the service. (Menue: Volkswagen - service CAN)

[mohsinauto]

Hi,
Thank you very much,
Can you send me the manual in English. I can't read Geman.

Can you send me the whole manual in English. I need that very much.

I don't have Can Hardware. only VW CAN.

I have something called Can Bus is it the same?

[zak]

i dont have english ones.

try here:

http://www.autoecutools.com/download/0321-PDFs-01English.rar

and:

http://www.autoecutools.com/download/0321-PDFs-02English.rar

attention: file size 375 MB !

you need a CAN-dongle and VW-CAN plug (OBDII).

Not the usual OBDII plug.

The CAN dongle should be a universal one.
Also needet for Mercedes, for example W211/ 209.

So your "CAN Hardware" is maybe the right one!

Look at the pictures from the German manual i attached in
the post before.

choose in your DIGA menue:

Volkswagen - Autodetect CAN

(The dongle fits into the Diga -
the VW-CAN calbe fits into the Dongle,
the OBD-plug in the car.)

you only have to enter the new mileage !

Try it. Nothing will be damaged - if it could't change.

Where is your DIGA from ?

[zak]

If you want to remove the cluster an clip the eeprom,
the instruction how to do is attached !

[mohsinauto]

Hi,
Thank you for your help.

I don't have problem with Passat and Bora 4 1999 to 2004 and I didn't use CAN-Dongle only DIGA-Consult and Audi A6 Alt Cable . I didn't try it with Golf 4 but I think it is the same way. I was able to change it with my DIGA-Consult 2007 I broght from China and I think it is clone but it does the job.

For Golf 5 I couldn't do it with the same way. I tryed the cable OBDII, Audi A6 Alt, and the VW Can Cable coming with the DIGA-Consult.

I didn't find Can dongle in the kit coming with DIGA-Consult. I found Can Bus only is it the same?

[mohsinauto]

By the way
1- I have VW Can Plug (OBDII Cable)
2- I have Can bus (It is like adapter between DIGA-Consult and OBDII)

[zak]

please apply a pic of your can hardware.

I think it is the right one.

[mohsinauto]

This is my can Bus found in the DIGA-Consult Kit

[mohsinauto]

These are my DIGA-Consult , VW Can, and can Bus.

[Clusterslaststand]

Problem is...you dont know if the can bus dongle is any good!
Try it on another canbus car and see if it works.

[mohsinauto]

I haven't tryed this can bus on golf 5 yet.

I will try it and let you know.

Thank you very much for your help.

Can you give me your E-mail. because I may need help on other subjects in future.

mohsinauto@hotmail.com

[mohsinauto]

I tryed it. First I switched on the igntion, the in Diga menue I chose Volkswagen_Autodetect can
I had on Diga screen Logon and waited for three minutes but nothing happened

I tryed again but didn't switch on the ignition the cluster opened for 2 seconeds the I had error message on my DIGA-Consult

[zak]

this is the right dongle.

Turn ignition on.

Connect the diga with the car
(diga - dongle - vw can calbe)

choose Volkswagen - autodetect can

wait - diga will detect the right one and you can enter the new mileage.

otherways you can try it with the menue:

Volkswagen - Golf 5 - Diagnosis

[Bannybasher]

those can dongles are crap i have tried 3 none worked i use the white from my original box.