Odometer Correction with the Diagprog 3 programmer

Easy and Safe Mileage Correction


How to adjust milage for golf 5 2005? using DIGA-Consult

How to adjust milage for golf 5 2005? using DIGA-Consult Odometer Correction with the Diagprog III programmer:
Easy and Safe Digital Mileage Correction

How to adjust milage for golf 5 2005? using DIGA-Consult

Goto page 1, 2  Next  
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Volkswagen / VW
 
Author Message
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Sun May 25, 2008 8:38 pm    Post subject: How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

How can I adjust the milage for Golf 5 2005? I have DIGA-Consult. but there is no golf 5 in the manual. In the DIGA-Consult there is golf 5 by Diagnose and clip.

I tryed to do it by OBDII but I could't. although I was able to adjust milage for Bora and Passat 2003 by ODBII.

I even removed the cluster but I couldn't take of the back cover of it, I was afraid to brake it!!!!

Please help
mohsinauto@hotmail.com
Back to top
zak
Member


Joined: 16 Apr 2008
Posts: 67

Posted: Mon May 26, 2008 7:26 am    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

Use the CAN-Dongle and the CAN-OBDII plug.

Select in your Diga: Volklswagen - Autodetect CAN

enter new mileage

after finish, use CAN 1551 to clear the ECU memory
Menue: Volkswagen - CAN 1551
(dont switch ignition on or off while can-dongle is connectet)

correct the service. (Menue: Volkswagen - service CAN)
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Mon May 26, 2008 10:21 am    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

Hi,
Thank you very much,
Can you send me the manual in English. I can't read Geman.

Can you send me the whole manual in English. I need that very much.

I don't have Can Hardware. only VW CAN.

I have something called Can Bus is it the same?
Back to top
zak
Member


Joined: 16 Apr 2008
Posts: 67

Posted: Mon May 26, 2008 11:54 am    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

i dont have english ones.

try here:

http://www.autoecutools.com/download/0321-PDFs-01English.rar

and:

http://www.autoecutools.com/download/0321-PDFs-02English.rar

attention: file size 375 MB !

you need a CAN-dongle and VW-CAN plug (OBDII).

Not the usual OBDII plug.

The CAN dongle should be a universal one.
Also needet for Mercedes, for example W211/ 209.

So your "CAN Hardware" is maybe the right one!

Look at the pictures from the German manual i attached in
the post before.

choose in your DIGA menue:

Volkswagen - Autodetect CAN

(The dongle fits into the Diga -
the VW-CAN calbe fits into the Dongle,
the OBD-plug in the car.)

you only have to enter the new mileage !

Try it. Nothing will be damaged - if it could't change.

Where is your DIGA from ?
Back to top
zak
Member


Joined: 16 Apr 2008
Posts: 67

Posted: Mon May 26, 2008 1:01 pm    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

If you want to remove the cluster an clip the eeprom,
the instruction how to do is attached !
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Mon May 26, 2008 9:01 pm    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

Hi,
Thank you for your help.

I don't have problem with Passat and Bora 4 1999 to 2004 and I didn't use CAN-Dongle only DIGA-Consult and Audi A6 Alt Cable . I didn't try it with Golf 4 but I think it is the same way. I was able to change it with my DIGA-Consult 2007 I broght from China and I think it is clone but it does the job.

For Golf 5 I couldn't do it with the same way. I tryed the cable OBDII, Audi A6 Alt, and the VW Can Cable coming with the DIGA-Consult.

I didn't find Can dongle in the kit coming with DIGA-Consult. I found Can Bus only is it the same?
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Mon May 26, 2008 9:25 pm    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

By the way
1- I have VW Can Plug (OBDII Cable)
2- I have Can bus (It is like adapter between DIGA-Consult and OBDII)
Back to top
zak
Member


Joined: 16 Apr 2008
Posts: 67

Posted: Tue May 27, 2008 5:50 am    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

please apply a pic of your can hardware.

I think it is the right one.
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Tue May 27, 2008 6:00 pm    Post subject: Can Bus Reply with quote

This is my can Bus found in the DIGA-Consult Kit
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Tue May 27, 2008 6:30 pm    Post subject: How to adjust milage for golf 5 2005? using DIGA-Consult.[b] Reply with quote

These are my DIGA-Consult , VW Can, and can Bus.
Back to top
Clusterslaststand
Senior Member


Joined: 23 May 2008
Posts: 127

Posted: Tue May 27, 2008 7:35 pm    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

Problem is...you dont know if the can bus dongle is any good!
Try it on another canbus car and see if it works.
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Tue May 27, 2008 8:45 pm    Post subject: How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

I haven't tryed this can bus on golf 5 yet.

I will try it and let you know.

Thank you very much for your help.

Can you give me your E-mail. because I may need help on other subjects in future.

mohsinauto@hotmail.com
Back to top
mohsinauto
Member


Joined: 25 May 2008
Posts: 68

Posted: Tue May 27, 2008 9:05 pm    Post subject: How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

I tryed it. First I switched on the igntion, the in Diga menue I chose Volkswagen_Autodetect can
I had on Diga screen Logon and waited for three minutes but nothing happened

I tryed again but didn't switch on the ignition the cluster opened for 2 seconeds the I had error message on my DIGA-Consult
Back to top
zak
Member


Joined: 16 Apr 2008
Posts: 67

Posted: Wed May 28, 2008 6:55 am    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

this is the right dongle.

Turn ignition on.

Connect the diga with the car
(diga - dongle - vw can calbe)

choose Volkswagen - autodetect can

wait - diga will detect the right one and you can enter the new mileage.

otherways you can try it with the menue:

Volkswagen - Golf 5 - Diagnosis
Back to top
Bannybasher
Senior Member


Joined: 13 May 2008
Posts: 285

Posted: Wed May 28, 2008 9:13 am    Post subject: : How to adjust milage for golf 5 2005? using DIGA-Consult Reply with quote

those can dongles are crap i have tried 3 none worked i use the white from my original box.
Back to top
Display posts from previous:   
Post new topic   Reply to topic    Odometer Correction Forum for Digital Mileage Correction -> Mileage Correction Volkswagen / VW All times are GMT
Goto page 1, 2  Next
Page 1 of 2

Topic Author Forum Replies Posted
No new posts Fox june 2008 possible with Diga Cons... Peter Mileage Correction Volkswagen / VW 3 Sat Nov 29, 2008 5:25 pm
No new posts how to adjust golf 4 josh Mileage Correction Volkswagen / VW 7 Sat Nov 29, 2008 2:47 pm
No new posts DP3 vs Enigma vs Diga Consult john54321 General questions 7 Thu Nov 27, 2008 5:39 pm
No new posts Mk 4 Golf Immobilser problem Guest Mileage Correction Volkswagen / VW 4 Wed Nov 26, 2008 12:34 pm
No new posts diga master II ? kenwood General questions 5 Wed Nov 26, 2008 8:36 am


 
Jump to:  


Protected by Anti-Spam ACP

Diagprog III Kit

Professional version

€ 8.999,00
7.479,00
in stock
+ 19% VAT (BTW)

Version Mercedes-Benz
3.700,00
in stock
+ 19% VAT (BTW)

Version VAG Modelle: VW / Audi / Seat / Skoda
4.100,00
in stock
+ 19% VAT (BTW)

Version BMW & MINI
3.200,00
in stock
+ 19% VAT (BTW)

includes: Hardware, software, all related cables and detailed instructions on a CD with exactly described programming steps as well as high-resolution illustrations as well as a communication programme for the speedometer.
One-week crash course on request in five languages: German, Spanish, English, Greek, Croatian Transportable laptop with integrated instructions and communication programme for the DP3-speedometer system and a professional soldering and hot-air station with fine soldering iron and an integrated hot-air station.


DP3 prices and support