| All Topics |
| Author |
Message |
Guest
|
 Posted: Sun Apr 13, 2008 8:15 pm Post subject: 2004 A3 can diagnostics |
 |
|
tried to do a 2004 A3 today using tacho universal and can dongal, logs in ok and reads correct mileage but did not change to new milage.
Any ideas? |
|
| Back to top |
|
 |
|
hcip
Senior Member
Joined: 03 Mar 2006
Posts: 146
Location: Brgy. Commonwealth, Quezon City Philippines
|
| Posted: Mon Apr 14, 2008 3:31 am Post subject: : 2004 A3 can diagnostics |
|
|
Try to remove dash fuse after programming for about 10 - 15 seconds
use CAN 1551 to correct errors
regards
_________________
 |
|
| Back to top |
|
|
mctacho
New member
Joined: 06 Jul 2008
Posts: 3
|
| Posted: Sun Jul 06, 2008 9:16 pm Post subject: : 2004 A3 can diagnostics |
|
|
Hello
you have a software bug in seed calculation.
disconnect the cluster and try it with an other programmer
not diga or clone this version fails.
_________________
www.dashcoder.com and www.912tool.de
please visit our sides |
|
| Back to top |
|
|
jimdashkirk
Member
Joined: 18 Jun 2008
Posts: 46
Location: bonnie scotland
|
| Posted: Sun Jul 06, 2008 9:22 pm Post subject: : 2004 A3 can diagnostics |
|
|
what is seed software problem ??
anyone knows that some a3 s have troubles. i had one last week
it didnt go with clone or the great dp3.
In the end after a lot of time it went with the dp3. you must try different values, pull cluster fuse,,it will go in the end. |
|
| Back to top |
|
|
mctacho
New member
Joined: 06 Jul 2008
Posts: 3
|
| Posted: Sun Jul 06, 2008 9:37 pm Post subject: : 2004 A3 can diagnostics |
|
|
Hello Mr. Askirk
after Login the cluster sends a seed to diga
diga hast to calculate an answer
if this answer fails the cluster is blocked
try this version with a dashcoder or a digiprog and it works
best regards
alex
_________________
www.dashcoder.com and www.912tool.de
please visit our sides |
|
| Back to top |
|
|
|
FAQ 
Search 
Memberlist 
Usergroups
Register
Profile 
Log in to check your private messages 
Log in 
