Odometer-Correction.com

[steffi]

Hi!

I have bought the Diga programmer from a friend.
I have started using it and it works great. I have tried the Can correction for the vw. But i got a problem when i was going to program the Audi service channels. I can not come in to service options. This car i have tried on is a 2007 Audi A4. This is K-line i think, but i got confused of all the cables. I am learning this now. But all help is usefull.

If you can see the packing list. Wicth cable is for the K OBD. It?s so many cables with ODBII. See file.
First i thought this was a bad version of Diga. But it says Diga soft version 2007 when i turn it on.

Thanks for all help. See file

[steffi]

I am trying to upload the file again.



Thanks again

[DashfixDotNet]

Cables used with Audi/VW cars are the blue OBDII and the VW CAN cable with the CAN box (dongle). Theorically you would use the VW CAN cable and dongle but the Diga cannot correct the A4 via OBDII at the moment. You have to do by reading the eeprom directly and there too there are special instructions. Read your manual carefully before you proceed. And SAVE the file before programming!!!

Serge

[steffi]

Hi Serge!

Yes i know that Audi A4 from year 2001/2002 to 2007 you have to do it by eeprom.
But when i am going to program service channels. I suppose i can program the service channels by the ODBII or do I have to program the service channel also at the eeprom??
As i said i have many OBDII cables. please see the list. It is not blue. they are all black.
Are the OBDII cable the same as the VW can cable if you take away the CAN Dongle?


Thanks very much for all answers

[DashfixDotNet]

According to your list it's #23. Don't forget to connect the CAN dongle. Use Service CAN in the VW menu and and then use channel 02. Set value to 0. All of this is done of course via OBD2.

Serge

[steffi]

Hi!

Thanks for your answer.

The problem is that Audi A4 2005 - 2007 runs with Dual K-line. I can not connect the diga to the car with Can.

Is it anyone ho has adjust channels for service insp with Diga on a Audi A4 B7 plattform?


Thanks in advance

Steffi