Odometer-Correction.com

[ohannis]

Hi Guys,
I have a VW Touareg 2005 I used the diga consult to porgram the car. what i have done is sorted the crystel and read the old mileage and then i have programed the new value. when i connected back the the cluter it did not work. diga-soft told me that we need the old value to program the eeprom. it does not make any sence. does any one have a V6 eeprom bin so that i can load it back to the eeporm hopping that it will work? please advice if any one has experianced the programming of the VW Touareg 2005....thanks
-O

[PMC]

Hi,

The old method requires original mileage entered also, as indicated by your support.

But that methos is old news, your vehicle is Diagnostic via OBD2 socket now

PMC

[PMC]

Hi,

The old method requires original mileage entered also, as indicated by your support.

But that method is old news, your vehicle is Diagnostic via OBD2 socket now

PMC

[ohannis]

So is there a fix for my problem ?
the eeprom on board is bad at this stage and there is nothing on the screen. please advice.
thanks in advicne.

[PMC]

Try new dump onto chip or change eeprom and use new dump.

[matarservice.com]

You have to read the immo login and code the keys to the new dump!

regards